All

pair of fully working LED 955 Reverse units,  you will see in photos the casing has scratching/discolour on the outer. ALL the bulbs fully work and give out the #Enhanced look still. These are sold as pairs and are none returnable and have no warranty. --- Consisting of 32 High powered LED's around the side, and 2 high power projection LED's on the end these bulbs give a fantastic projection. We give you, the #Enhanced Edition 955 LED Unit Technical Info 12v Low Power useage / High Lumen Output 5000k Ice White in colour 34 SMD's per LED

Read more less

Please note: spacers are sold as PAIRS! if you want to do front and rear than qty x2 is needed!ONLY 25MM LEFT IN BLACKStrengthened, Fortified and immortalised.Our Home brand CEUK Wheel spacers are now made exclusively for us by none other than Eibach in Germany!Lifetime GuaranteeUltra Strong Spacer & StudsBlack & Silver now availableMultiple Stud PatternsPlease ensure you select correctly!Please note, Due to the nature and complexity of a wheel spacer, customers MUST know that the size they are ordering is correct prior to ordering by measuring your stud length and wheel groove depth. Unfortunately, if over tightened the integrity of the spacer and / or bolts can be compromised - and due to this, any spacer that has been fitted, trial fitted or removed from its packaging can not be returned! Please be aware of this as by ordering you agree to this!

Read more less

CEUK By Pipercross Panel Filter PP2008-CEUK Made exclusively by Pipercross for CEUK, these UK Made foam filters are some of the highest quality Benefits of a CEUK/Pipercross panel filter: 30-40% more air flow over your OEM paper filter Better for the environment (washable and reuseable) Improved fuel economy Lifetime warranty on manufacturing defects Handmade in the UK The low maintenance and long lifespan aspects of a Pipercross filter come from the special triple layer foam that is used on all Pipercross filters. The outer core is coarse foam designed to trap larger particles, the middle core is Medium foam designed to trap most particles and the inner core is fine foam which will trap the remainder of the particles. The triple layer foam design ensures an exceptional level of engine protection in any conditions. Pipercross, based in the UK home of motorsport have over 30 years of road and track racing experience when it comes to filtration. Through this experience and engineering only the highest quality is achieved which is passed onto you through more power, torque, fuel economy & throttle response. Why settle for lesser filter brands which only have road experience when you can have quality proven on the track? 

Read more less

CEUK By Pipercross Panel Filter PP2069-CEUK Made exclusively by Pipercross for CEUK, these UK Made foam filters are some of the highest quality Benefits of a CEUK/Pipercross panel filter: 30-40% more air flow over your OEM paper filter Better for the environment (washable and reuseable) Improved fuel economy Lifetime warranty on manufacturing defects Handmade in the UK The low maintenance and long lifespan aspects of a Pipercross filter come from the special triple layer foam that is used on all Pipercross filters. The outer core is coarse foam designed to trap larger particles, the middle core is Medium foam designed to trap most particles and the inner core is fine foam which will trap the remainder of the particles. The triple layer foam design ensures an exceptional level of engine protection in any conditions. Pipercross, based in the UK home of motorsport have over 30 years of road and track racing experience when it comes to filtration. Through this experience and engineering only the highest quality is achieved which is passed onto you through more power, torque, fuel economy & throttle response. Why settle for lesser filter brands which only have road experience when you can have quality proven on the track? 

Read more less

VERY FAINT MARK ON CAGE - WONT BE SEEN ONCE FITTED - NONE RETURNABLE CLEARANCE ITEM FITS FACELIFT MK3 ST250  All Direnza Cold Air Induction Systems are supplied with a high quality, cone style air filter; designed to replace the OEM airbox, offering more surface area compared to the standard filter. Direnza air filters are manufactured from premium grade, washable cotton, ensuring long-lasting performance enhancements. Direnza Cold Air Induction Kits include lightweight alloy pipework mandrel-bent for accurate placement on your vehicle, and coated with a premium grade, black textured finish for a sleek appearance. Designed in-house by Direnza engineers, our Cold Air Induction Kits reduce blockages and significantly enhance air flow into the engine compared with stock induction arrangements, boosting your car’s soundtrack and performance. Heat-resistant silicone hoses are supplied with every Direnza Cold Air Induction Kit. An often-overlooked item, our easy-fit silicones are layered for extra durability, their 5mm wall consisting of four polyester layers finished with jet black pigment. Designed to replace the OE setup, providing up to 50% more filter surface area to help maximise capacity Engineered to help the 2.3L turbo engine breathe easier and improve throttle response from your Focus RS. Gains in power and torque are noticeable over a larger RPM range A straightforward way to give your MK3 RS a sporty, performance soundtrack Complete kit includes mandrel-bent alloy pipework, high quality cotton filter and high performance silicone hoses Fitment Ford Focus Mk3 ST250 2.0 2012-2018 Please note: Please ensure your MAF sensor is the the bolt in style before purchase OEM Part Number 1937555

Read more less

SLIGHT QUALITY ISSUE WITH A HANDFULL ON THE LAST BATCH SO THESE ARE NOW UP FOR CLEARANCE. THE MOULD APPEARS TO HAVE BLED CAUSING LITTLE BITS OF MELTED PLASTIC ON THE CLIPS WHICH NEEDS TRIMMING OFF WITH SNIPS OR A BLADE AND THE OVERALL QUALITY IS ABOUT 20% LOWER THAN EXPECTED. THESE ARE PERFECT FOR A "DIY'ER" WHO WANTS TO HAVE A FIDDLE ON THE CHEAP. NONE RETURNABLE Ford Performance logo in Red and White as seen in the pictures! Number plate surround with Ford Performance logo can be used for front or rear of vehicle - Sold as a Pair so one for each! Add a distinctive look to your Ford with Ford Performance licence plate holders for your vehicle registration plates.

Read more less

WILL FIT ALL MK8 AND 8.5 FIESTA ST - ALL DIESEL MODELS AND OTHER PETROL MODELS PRE 2020 WILL ALSO FIT MK2 PUMA ST Filter TypeFilter Insert Height mm70 Length mm161 Width mm217 Please note: This will not fit Post 2020 EcoBoost models as there was a change to the shape - please ensure you check the shape VS your own airbox before ordering!   MANN-FILTER Air Filter It's important to check the condition of your cars air filter at regular intervals; we recommend that your air filter is changed every time your car has an annual or 12,000 mile service. Your cars air filter prevents airborne debris such as dust, leaves and other abrasives finding their way in to the engine's cylinders where it can mix with the lubricating oil and form an abrasive compound. This will cause wear to the cylinders, pistons and bearings causing permanent damage. If your air filter is left neglected it will get dirty and blocked preventing your engine from sucking enough air into the combustion chamber, this will potentially cause your car to run rough and lose power due to the air/fuel ratio being too rich. We recommend that you check the filter size and shape of your air filter with the picture and dimensions available to ensure correct fitment.  

Read more less

These items are slightly marked in certain areas, each set is unique and as a result they are on clearance at 50% off - Please note, these are NONE RETURNABLE and NO WARRANTY IS PROVIDED! All items are brand new, marks may be from production or storage - There is 1 set of each, if the item shows as "Sold out" when you select it, then it has already gone SET 1: SOLD SET 2: LEFT HAS SMALL BLACK MARK ON LED STRIP & SCRATCHES ON LENSE, RIGHT HAS SMALL BLACK MARK ON LED STRIP & SCRATCHES ON LENSE SET 3: LEFT HAS SMALL BLACK MARK ON LED STRIP & SCRATCHES ON LENSE, RIGHT HAS SMALL BLACK MARK ON LED STRIP & SCRATCHES ON LENSE   ITEM DESCRIPTION The All new Enhanced Edition sequential indicator unit from CEUK for the MK7 Fiesta (Pre Facelift & Facelift)   A fine complement for our LED front and rear indicator offerings! Simple plug and play unit, installed by simply removing the OEM bulb and lense and replacing with our full replacement Unit! Amber sequential strobing that is completely canbus friendly!  Smoked Lense Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty.  

Read more less

 FITS MK8 AND MK8.5 FIESTA / MK2 Puma These items are slightly marked in certain areas, each set is unique and as a result they are on clearance at 50% off - Please note, these are NONE RETURNABLE and NO WARRANTY IS PROVIDED! All items are brand new, marks may be from production or storage - There is 1 set of each, if the item shows as "Sold out" when you select it, then it has already gone SET 1: LEFT HAS SMALL BLACK MARK ON LED STRIP, RIGHT HAS SMALL BLACK MARK ON LED STRIP SET 2: LEFT HAS SMALL BLACK MARK ON LED STRIP, RIGHT HAS SMALL BLACK MARK ON LED STRIP SET 3: LEFT HAS SMALL BLACK MARK ON LED STRIP, RIGHT HAS SCRATCHES ON LENSE SET 4: LEFT HAS STRAIGHT SLIT MARK ON LED STRIP, RIGHT HAS SMALL BLACK MARK ON LED STRIP SET 5: LEFT HAS SMALL BLACK MARK ON LED STRIP, RIGHT HAS SMALL BLACK MARK ON LED STRIP SET 6: LEFT HAS SMALL BLACK MARK ON LED STRIP, RIGHT HAS SMALL BLACK MARK ON LED STRIP   ITEM DESCRIPTION The All new Enhanced Edition sequential indicator unit from CEUK for the MK8 Fiesta! A fine complement for our LED front and rear indicator offerings  Simple plug and play unit, installed by simply removing the OEM bulb and lense and replacing with our full replacement Unit! Amber sequential strobing that is completely canbus friendly!  Designed in house by the team at CEUK you will not find these anywhere else with as good a quality  Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Protected by British Copyright Law Intellectual Property Ownership Reference: 6085957  

Read more less

The latest in sport discs feature wide aperture slots that draw cool air into the braking contact area and reduce temperatures preventing brake fade. Dimple drilling avoids stress cracks and the thermic black coating provides great looks whilst preventing corrosion. Read More... EBC sport discs now feature reduced 3 slot venting which provides slightly less air noise under heavy braking whilst still maintaining the benefits of cooler running with the full width slot design. The design of these discs means that some wind noise is observed and if drivers feel they would find this offensive they are advised to select the quieter USR Ultimax series or the EBC plain disc. Another great feature of slotted discs is the way they MAINTAIN FLAT AND PARALLEL PAD WEAR and avoid the record grooves or galling common with non-slotted discs. This improves pad contact and braking throughout the life of the disc and pad set.

Read more less

C:Performance Maf Housing to suit the following Vehicles: MK7.5 Fiesta ST180 / ST200 70mm Internal Diameter Made from Cast aluminium then machine finished these were part of our MK7 Fiesta ST180 Intake kits! These are reduced to clear due to our recent Rebrand from "C:Performance" to "Enhanced Performance" They come in raw metal and require painting or powder coating - This can be done with a spray can for cost effectiveness making this a really cheap addon, or powder coated for the ultimate finish Picture does not show screws, however this will be provided with 2x Small threaded screws for the sensor Designed to work With CEUK/Airtec/Forge etc Stage 2 & 3 intake kits Features iconic C Logo Raised on both sides  Knurled on silicone hose side to prevent slippage Machine finished for a perfect fit every time Will fit any 70mm inlet hose and filter

Read more less

An Alloy Header Tank for BMW Mini 2007 onwards Cooper S Models. Hand crafted and polished in the UK making for an easy fitment and replacement. If you are unsure if this product is suitable for your application, please contact us.  FITS: R55 CLUBMAN  R56 HATCHBACK R57 CONVERTIBLE R58 COUPE R59 ROADSTER     Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

PLEASE MEASURE YOUR DISCS - THE FACELIFT MODEL HAS 335MM DISCS WHERE THE PRE FACELIFT HAS 320MM DISCS - SOME EARLY FACELIFT MODELS WERE SOLD WITH PRE FACELIFT DISCS. ENSURE YOU ORDER CORRECTLY AS THERE MAY BE COSTS INVOLVED WHEN NEEDING TO SEND ITEMS BACK FOR SWAPPING! IF YOUR FACELIFT MODEL HAS 320MM DISCS YOU MUST ORDER PRE FACELIFT! Featuring bi-directional fine slots, the new EBC Brakes BSD series brake discs vent the brake area better, drawing heat away from the central brake pad area and with more slot under the pad contact area, these discs are totally silent in operation and de-gas your brakes when used at speed or under heavier loads minimising heat fade. Read More... Now with lower pricing and the thermic black anti corrosion coating with show-thru silver slots, these discs are surely the best through wheel looks and most functional sport discs on sale. The fine slot pattern prevents the _Ribs� that typically generate after 5-10,000 miles of use on non slotted discs and maintain flat and parallel pad wear and due to the fine slot design can even extend pad wear life

Read more less

THIS ITEM IS NONE RETURNABLEPFF19-2225 is an insert only that fits into the original engine mount for reduced engine movement. For a complete mount including bushes please use PFF19-2223. Fits models with the 1.0 Ecoboost engine only. OEM Part Number: H1BG-6P082-AC   Quantity per car 1      

Read more less

THIS ITEM IS NONE RETURNABLE The ECS Tuning Front Mount Intercooler (FMIC) Kit boosts power and lowers intercooler outlet temps by maximizing core volume and more efficiently dispelling heat over the OEM sandwich-mounted intercooler. The factory intercooler is positioned between two hot heat exchangers, the A/C Condenser and Radiator, and suffers from an undersized and underperforming tube and fin core from the factory. Upgrading the OE-location intercooler is difficult for most hobbyists and is hidden within the core support. An alternative choice is our In-House Designed and Engineered FMIC Kit which relocates the charge cooler front and center, right behind your front bumper cover for maximum available airflow while moving it away from the hot heat exchangers inside the engine bay, all while adding an aggressive appearance to your turbocharged VW!  Our design features high quality cast aluminum end tanks with an integral flow divider on the inlet for even flow distribution, a massive 26” x 7 ⅞” x 3.0” (614.25 in.³ volume) aluminum bar and plate core, which lends to an increase in volume of +19.78% over the OEM GTI intercooler, for maximum heat dissipation, bolt-on powder-coated steel brackets, which require absolutely NO drilling or cutting, and 5-ply pre-molded silicone couplers with T-Bolt hose clamps. Our intercooler was in-house engineered to provide a bolt-on cooling solution for the VW MK7 GTI and Golf R market. Through our in-house evaluation on our ECS Shop MK7 GTI, we measured an increase of +24 WHP @ 6,400 RPM and +18 WTQ @ 6,375 RPM along with an increase of 19% in cooling efficiency and 80° F. lower intercooler outlet temperatures after 3 consecutive dyno pulls.    PART DESIGN INTERCOOLER 3D CAD designed to allow the largest intercooler possible without permanent modifications (no cutting or drilling)  Aluminum Straight Vane Bar and Plate Core - 26” x 7 ⅞” x 3.0” (614.25 in.³ internal core volume)  Raw Cast Aluminum End Tanks with smooth flowing internal inlet and outlet flow-paths  Cast 2.50" barbed connections keep hoses secured and minimizes the risk of hoses blowing off Internal flow divider on intercooler inlet for even flow distribution between the intercooler core  End tanks are tig welded to the intercooler core and the complete assembly is pressure tested to 3.5 BAR at 0% leak down to ensure sealing capacity Cast mounting features supply our bracketry with a rigid mounting point  MOUNTING BRACKET KIT Our unique design to mount the intercooler makes this kit truly remarkable! By bolting our brackets to the lower crash beam bolts, absolutely no drilling into your core support or drilling into your beam are required! Simply remove your lower crash beam bolts to install our brackets. The beam does NOT need to be removed.  Made from rigid ⅛” thick steel then powder-coated wrinkle-black for corrosion protection  Pre-installed zinc-plated rivet nuts make for a simple bolt-on solution to our intercooler with our included stainless steel bolts and washers  Included in the kit are our horn brackets which position the horns closer to the beam to make way for silicone charge pipe routing.  A pre-welded tab on the driver's side bracket maintains a mounting point for the ambient air temperature sensor bracket.  SILICONE COUPLERS Pre-molded and held to tight tolerances to achieve the best flow possible while navigating the tight areas within the MK7's front end  Made from heavy-duty, 5-ply fiberglass reinforced silicone for burst resistance. Capable of handling 250° F. operating temperatures and over 45 PSI.   Smooth internal passageways and smooth bends keep airflow at peak for the greatest level of performance    KIT CONTENTS ECS Front Mount Intercooler ECS Direct-Fit Mounting Bracket Kit with Mounting Hardware ECS Silicone Couplers with T-Bolt Hose Clamps    PERFORMANCE FEATURES Dyno tested on our In-House Mustang Dyno on our shop 2015 MK7 GTI 2.0T 6 speed manual, comparing OEM GTI intercooler to ECS FMIC. Please see our documented results under the INSTALLATION Tab for more information.  Vehicle Modifications: APR Stage 2 Hi-Torque 93 Octane Tune, Milltek 3.0" Catted Turbo-Back Exhaust, ECS Kohlefaser Luft-Technik Intake, ECS Charge Pipes  +24 WHP @ 6,400 RPM and +18 WTQ @ 6,375 RPM 15° Fahrenheit lower intercooler outlet temperature drop over 3 consecutive dyno pulls 80° Fahrenheit lower intercooler temperature rise over 3 consecutive dyno pulls  +19% more efficient at 6,250 RPM (+4% at lower engine speeds, ~3,250 RPM) 0.5 PSI lower pressure drop at 6,250 RPM   PRODUCT DEVELOPMENT Our ECS Front Mount Intercooler Kit was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT Looking for installation tips? Look no further, we put together a full installation tutorial from start to finish including how to remove your front bumper cover in detail! See our Installation PDF under the INSTALLATION Tab for more information. No cutting, drilling or any other permanent modifications are required for intended fitment.  Vehicles with SAI (Secondary Air Injection) will need to bend the wiring harness bracket 45° to clear silicone coupler. This can easily be bent to original form if ever desired.  Be advised this will NOT FIT pre-facelift MK7s with forward collision warning radar (large black sensor in lower, center bumper grille).  Cross Reference FMIC, charge cooler This Part Fits the Following Vehicles Make Model Submodel Engine Volkswagen Golf VII Hatchback 2.0T Gen3 Volkswagen Golf VII Facelift FWD 2.0T Gen3 Volkswagen Golf VII R 4Motion 2.0T Gen3 Volkswagen Golf VII R Facelift 4Motion 2.0T Gen3 *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

PRODUCT DESCRIPTION Handed 1-piece brake discs with 6 grooves on the braking surface to act like a wiper and fully drilled countersunk holes to vent hot gases. Kit contents: 2 discs. 252 mm diameter Final balancing to within 0.01 mm for perfect contact and a quick bedding-in process Anti-rust treatment Strategically placed countersunk holes ensure the disc runs cooler for longer Manufactured from the highest quality carbon steel and heat treated for strength and durability Strada 122 brake pads recommended Download: TÜV-Approval/Part Assessment

Read more less

Bespoke Custom Design Mudflaps to fit:Hyundai i20N / N-Line Hatchback VersionDesigned and made to order here in the UK by us 'The rallyflapZ Team' *ShortieZ* - Protection without the full Rally Look! ShortieZ are our latest design, They do not stick out / hang as low as our rallyflapZ Version Mudflaps! Designed for Looks & Protection Only the Best Materials used Easy Installation Long Lasting Exceptional Flexibility Impact Resistance HYUNDAI I20N / N-LINE HATCHBACK - KIT INCLUDES:Front Fixing Kit Contents:2 x Front Mud Flaps2 x Laser-Cut Stainless Steel Brackets (Black Powder Coated) & All Fixings RequiredRear Fixing Kit Contents:2 x Rear Mud Flaps2 x Laser-Cut Stainless Steel (Black Powder Coated) & All Fixings required Avoid expensive re-sprays and get some protection now against Road Grit, Mud, Dirt & GreaseOur rallyflapZ / ShortieZ offer outstanding durability when compared to conventional OEM hard plastic or moulded Mudflaps, You can be assured that with our rallyflapZ come peace of mind that they can be exposed to the harshest weather conditions without any danger of corrosion.MATERIALS 4mm Thick PVC (Gloss) - Perfectly fine for everyday road use - High Quality with a Gloss Finish 4mm Thick PVC (Satin) - Perfectly fine for everyday road use - High Quality with a Satin / Matt-like FinishLOGO'SOur Logo's are a High quality vinyl material which is applied once the Mud Flaps have been cut to shape and sanded.The Vinyl is long lasting once applied to the mud flap material - however in the event of peeling or damage to them - we offer a life time guarantee on them!

Read more less

Bespoke Custom Design Mudflaps to fit:Ford Focus MK4 ST & ST-Line - *ESTATE Version*Designed and made to order here in the UK by us 'The rallyflapZ Team' *ShortieZ* - Protection without the full Rally Look! ShortieZ are our latest design, They do not stick out / hang as low as our rallyflapZ Version Mudflaps! Designed for looks & protection Only the Best Materials used Easy Installation Long Lasting Exceptional Flexibility Impact Resistance *** Important Notes: These shortieZ will fit the models that have the black plastic strip on the edge of the front wheel arch. Where this is fixed - when removed will become the front fixing points for the front mudflaps. If you do not  have this black plastic strip then there is nowhere for the front mudflaps to fix to unfortunately. THIS MUST BE CHECKED BEFORE PURCHASE! *** Note: If your car has 'rear side parking sensors' these will NOT fit to your car! Ford Focus MK4 ST & ST-Line (ESTATE )- KIT INCLUDES:Front Fixing Kit Contents:2 x Front Mud FlapsAll Fixings RequiredRear Fixing Kit Contents:2 x Rear Mud Flaps2 x Rear Laser Cut Stainless Steel BracketsAll Fixings required Avoid expensive re-sprays and get some protection now against Road Grit, Mud, Dirt & GreaseOur rallyflapZ / ShortieZ offer outstanding durability when compared to conventional OEM hard plastic or moulded Mudflaps, You can be assured that with our rallyflapZ come peace of mind that they can be exposed to the harshest weather conditions without any danger of corrosion.  MATERIALS 4mm Thick PVC (Gloss) - Perfectly fine for everyday road use - High Quality with a Gloss Finish 4mm Thick PVC (Satin) - Perfectly fine for everyday road use - High Quality with a Satin (Matt-Like) Finish  

Read more less

Bespoke Custom Design Mudflaps to fit:Ford Focus MK4 ST & ST-LineDesigned and made to order here in the UK by us 'The rallyflapZ Team' *ShortieZ* - Protection without the full Rally Look! ShortieZ are our latest design, They do not stick out / hang as low as our rallyflapZ Version Mudflaps! Designed for looks & protection Only the Best Materials used Easy Installation Long Lasting Exceptional Flexibility Impact Resistance   WHICH VERSION DO I NEED?VERSION 1: For models that-have the black plastic strip on the edge of the front wheel arch - without this there  is nowhere for the mudflaps to fix to.-does not have side parking sensors   VERSION2:For models that-has the black plastic strip on the edge of the front wheel arch - without this there  is nowhere for the mudflaps to fix to.-Has side parking sensors as pictured below:   THIS MUST BE CHECKED BEFORE PURCHASE! Ford Focus MK4 ST & ST-Line - KIT INCLUDES:Front Fixing Kit Contents:2 x Front Mud FlapsAll Fixings RequiredRear Fixing Kit Contents:2 x Rear Mud Flaps2 x Rear Laser Cut Stainless Steel BracketsAll Fixings required Avoid expensive re-sprays and get some protection now against Road Grit, Mud, Dirt & GreaseOur rallyflapZ / ShortieZ offer outstanding durability when compared to conventional OEM hard plastic or moulded Mudflaps, You can be assured that with our rallyflapZ come peace of mind that they can be exposed to the harshest weather conditions without any danger of corrosion.  MATERIALS 4mm Thick PVC (Gloss) - Perfectly fine for everyday road use - High Quality with a Gloss Finish 4mm Thick PVC (Satin) - Perfectly fine for everyday road use - High Quality with a Satin (Matt-Like) Finish   LOGO'SOur Logo's are a High quality vinyl material which is applied once the Mud Flaps have been cut to shape and sanded.The Vinyl is long lasting once applied to the mud flap material - however in the event of peeling or damage to them - we offer a life time guarantee on them!

Read more less

Bespoke Custom Design Mudflaps to fit:VW Golf Mk7, Mk7.5 R, GTI, GTDDesigned and made to order here in the UK by us 'The rallyflapZ Team' *ShortieZ* - Protection without the full Rally Look! ShortieZ are our latest design, They do not stick out / hang as low as our rallyflapZ Version Mudflaps! Designed for Looks & Protection Only the Best Materials used Easy Installation Long Lasting Exceptional Flexibility Impact Resistance VW Golf Mk7, Mk7.5 (all models) KIT INCLUDES:Front Fixing Kit Contents:2 x Front Mud Flaps & BracketsAll Fixings RequiredRear Fixing Kit Contents:2 x Rear Mud Flaps2 x Rear Laser Cut Stainless Steel BracketsAll Fixings required Avoid expensive re-sprays and get some protection now against Road Grit, Mud, Dirt & GreaseOur rallyflapZ / ShortieZ offer outstanding durability when compared to conventional OEM hard plastic or moulded Mudflaps, You can be assured that with our rallyflapZ come peace of mind that they can be exposed to the harshest weather conditions without any danger of corrosion.MATERIALS 4mm Thick PVC (Gloss) - Perfectly fine for everyday road use - High Quality with a Gloss Finish 4mm Thick PVC (Satin) - Perfectly fine for everyday road use - High Quality with a Satin / Matt-like Finish  LOGO'SOur Logo's are a High quality vinyl material which is applied once the Mud Flaps have been cut to shape and sanded.The Vinyl is long lasting once applied to the mud flap material - however in the event of peeling or damage to them - we offer a life time guarantee on them!

Read more less

The 034Motorsport Billet Coolant Vent Union is designed to replace the factory plastic and failure-prone coolant union on the cylinder head of the EA888 Gen3 and Gen4 engines. Being in close proximity to the turbocharger, the factory plastic coolant union is subject to a lot of heat, becoming brittle and failing over time. Upgrading to the Billet Coolant Vent Union minimizes the risk of coolant leaks, enhancing the reliability of your EA888!The 034Motorsport Billet Coolant Vent Union is machined from billet 6061-T6 aluminum, which is ideal for components exposed to high temperatures and harsh operating conditions. The Billet Coolant Vent Union is then black anodized for long-lasting looks and corrosion resistance to ensure that this upgrade is able to withstand the high temperatures next to your turbocharger. FEATURES: CNC Machined From Billet 6061-T6 Aluminum Black Anodized for Long Lasting Good Looks and Corrosion Resistance New O-Ring Preinstalled Direct Replacement of OEM Component WHAT’S INCLUDED: 034Motorsport Billet Coolant Vent Union 1x O-Ring Preinstalled VEHICLE FITMENT FOR: Shop By Car/Audi/Q3 (Mk1 11-18) Shop By Car/Audi/A6 (C7) Shop By Car/Audi/A7 (4G8 10-17) Shop By Car/Audi/A5 (B8) Shop By Car/Audi/A4 (B9) Shop By Car/Audi/A5 (B9) Shop By Car/Volkswagen/Passat B8 Shop By Car/Audi/Q5 (B9) Shop By Car/Volkswagen/Tiguan (Mk2) Shop By Car/Volkswagen/Arteon Shop By Car/Audi/S3 (8V) Shop By Car/Volkswagen/Golf Mk7 Shop By Car/Skoda/Octavia Mk3 (5E) Shop By Car/Audi/A3 (8Y 2020-) Shop By Car/Audi/A3 (8V 12-20) Shop By Car/Audi/TT Mk3 (8S) Shop By Car/SEAT/CUPRA/Leon Mk3 (5F) Shop By Car/Volkswagen/Beetle (16) Shop By Car/Audi/S3 (8Y)

Read more less

Modern direct injection engines are efficient and powerful, but are prone to carbon deposits that build up inside the intake port and on the back-side of intake valves. These deposits rob the engine of power and efficiency. Traditional methods of manually removing these deposits can be difficult, time consuming, and expensive. The 034Motorsport Direct Injection Head Port Cleaning Tool makes short and easy work of removing these deposits from your intake ports and valves. The tool has a small port for a media blasting wand and a large port that connects to a shop vacuum hose. The vacuum generated by the shop vac holds the tool in place up against the intake port, freeing your hands to focus on the media blasting. To use, simply rotate the crankshaft to close the intake valves in a given intake port before positioning the Direct Injection Head Port Cleaning Tool on the intake port. Turn on the vacuum and media blast away. All of the blasting media is sucked into the shop vac, making the entire process quick and easy, with little to no clean-up necessary afterwards. Features:Machined from Billet 6061-T6 Aluminum For DurabilityClear Anodized for an Attractive, Corrosion Resistant FinishFits Standard 40mm (1 1/2") ShopVac HoseAccommodates Media Blast Wands Up to 10mm (3/8") in DiameterMakes Carbon Cleaning of Direct Injection VAG Engines Much Easier and Faster What's Included:Direct Injection Head Port Cleaning Tool (x1)Lots of Additional Free Time Fitment Guide:See Fitment Guide Tab for Extensive List of Applications Frequently Asked Questions:Does this fit the cylinder head without injector removal? - YESDoes this fit the B7 RS4 heads without injector removal? - YESNote: For 2.0 motors, it is easier to use this tool with the injectors removed, and the 2.0 injectors are easy to remove.   Suitable for: Shop By Car/Audi/RS7 (C7) Shop By Car/Audi/Q3 (Mk1 11-18) Shop By Car/Audi/A6 (C7) Car Care/Tools Shop By Car/Audi/A6 (C6) Shop By Car/SEAT/CUPRA/Exeo Shop By Car/Skoda/Roomster Shop By Car/SEAT/CUPRA/Ibiza Mk5 (6J) Shop By Car/Audi/TT Mk2 (8J) Shop By Car/Audi/S4 (B7) Shop By Car/Audi/S4 (B6) Shop By Car/Audi/RS5 (B8) Shop By Car/Audi/RS4 (B7) Shop By Car/Audi/RS3 (8P) Shop By Car/Audi/R8 Mk1 (42 06-15) Shop By Car/Audi/A8 Shop By Car/Audi/A7 (4G8 10-17) Shop By Car/Audi/A5 (B8) Shop By Car/Audi/A4 (B8) Shop By Car/Audi/A4 (B7) Shop By Car/Volkswagen/Tiguan (Mk1) Shop By Car/Volkswagen/Passat B6 Shop By Car/Volkswagen/EOS Shop By Car/Audi/A4 (B9) Shop By Car/Audi/A5 (B9) Shop By Car/Skoda/Fabia Mk3 (NJ) Shop By Car/Volkswagen/Tiguan (Mk2) Shop By Car/Volkswagen/Golf Mk5/Maintenance / Tools Shop By Car/Audi/S3 (8V)/Maintenance / Tools Shop By Car/SEAT/CUPRA/Ateca Shop By Car/Audi/Q2 Shop By Car/Audi/S6 (C7) Shop By Car/Volkswagen/Golf Mk7/Maintenance / Tools Shop By Car/Skoda/Karoq Shop By Car/Skoda/Kamiq Shop By Car/Volkswagen/Golf Mk6/Maintenance / Tools Shop By Car/Skoda/Octavia Mk3 (5E)/Maintenance / Tools Shop By Car/Skoda/Fabia Mk2 (5J)/Maintenance / Tools Shop By Car/Audi/S6 (C6) Shop By Car/Audi/A3 (8P 03-13)/Maintenance / Tools Shop By Car/Audi/A3 (8V 12-20)/Maintenance / Tools Shop By Car/Audi/S3 (8P)/Maintenance / Tools Shop By Car/Audi/TT Mk3 (8S)/Maintenance / Tools Shop By Car/Audi/S5 (B8)/Maintenance / Tools Shop By Car/Audi/TT RS (8J)/Maintenance / Tools Shop By Car/Skoda/Fabia Mk1 (6Y)/Maintenance / Tools Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)/Maintenance / Tools Shop By Car/Volkswagen/Beetle (16)/Maintenance / Tools Shop By Car/SEAT/CUPRA/Formentor Shop By Car/Audi/RS6 (C7)/Maintenance / Tools     Code: 034-034-108-Z054

Read more less

350mm 2-Piece Floating Rear Brake Rotor Upgrade for MQB VW & Audi is a complete replacement brake rotor and caliper carrier kit, designed to work flawlessly with the factory rear calipers. Upgrading your rotors will increase overall braking performance in street, track, and HDPE driving conditions, as they keep your brakes cool and strong all day long!Weighing in at approximately 14lbs, each rotor reduces rotational weight by 1lb on each corner over the factory 15lb rotors and increases rotor diameter from 310mm to 350mm! This increases stopping power and reduces rotational weight! While reducing weight, the rotor retains proper thermal mass in the rings to adequately capture, and dissipate heat.The central hat portion of the 034Motorsport rotor is made of 6061-T6 aircraft specification aluminum. The disc is constructed out of a proprietary metal alloy that can withstand immense braking temperatures while holding form. The rotor utilizes 72 directionally curved veins to forcefully flow cool air through the rotor to dissipate heat.The face of the rotor utilizes J-Hook slots to clean the pad surface of contaminants and allows hot pad outgassing.The rotor and hat have a floating mount system that utilizes high strength alloy steel bobbins. The pins take the load from braking actions while maintaining the axial and radial float between the hat and disc, allowing for safe expansion and contraction from heat. FEATURES: Lightweight Construction (14lb 350mm 034Motorsport Rotor vs. 15lb 310mm OE Rotor) Floating, 2-Piece Design Aerospace Grade Aluminum Hats CM-250 Special Alloy Rotor Rings J-Hook Slotted Friction Face OEM Fitment & Functionality 72 Curved Vanes Force Cooling Air through Brake Disc Floating Bobbins Mounting System Replaceable Rotor Rings Lower Long-term Maintenance Cost WHAT'S INCLUDED: 034Motorsport 2-Piece Floating Rear Rotor Pair Caliper carrier conversion brackets FITS: Shop By Car/Audi/S3 (8V)/Big Brake Kits Shop By Car/Volkswagen/Golf Mk7/Big Brake Kits Shop By Car/Skoda/Octavia Mk3 (5E)/Big Brake Kits Shop By Car/Audi/RS3 (8V)/Big Brake Kits Shop By Car/Audi/TT RS (8S)/Big Brake Kits Shop By Car/Audi/A3 (8V 12-20)/Big Brake Kits Shop By Car/Audi/TT Mk3 (8S)/Big Brake Kits Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)/Big Brake Kits

Read more less